This patch cable is terminated with female MTP connectors on both ends with APC polish, and twelve single-mode fibers.
The cable is built in a “straight through” configuration, also referred to as Method A.
These cables are custom made - Exchanges or refunds are NOT possible.
MTP/MPO is a registered trademark of US Conec Ltd.
MPO Trunk Cable - Type A
A “Type A” cable is also known as a straight-through cable. This cable configuration has a key-up MPO connector on one end and a key-down MPO connector on the opposite end.
This connector configuration makes the fibers at each end of the cable have the same fiber position. The fiber located at position 1 of connector “A” on one side will arrive on position 1 at connector “B”.
The figure below shows the fiber sequence of a 12 fiber MPO Type-A cable: